The SP House Service Cutouts are most compact, convenient and reliable products for street lighting applications. These product are designed for 25A, single Phase & neutral lines as per BS 7654. It has a unique design offering easy installation on the street lighting equipment. The Street Lighting Cutouts offers IP22 degree of protection. Further, the housing is made up of high quality Dough Moulding compound (DMC) which offers excellent mechanical & Electrical strength.
Design Characteristics:
- It can accommodate two core / four core cables as follows:
- Type- A-1 Suitable for accommodating one incoming two core cable & One outgoing two core cables.
- Type- B-1 Suitable for accommodating one incoming four core cable & one outgoing four core cable. Two cores from both incoming & outgoing cables can be looped without being electrically used
- through two separate terminals.
- Terminals are made up of tinned brass with serrated bores of Dia 8 mm.
- Rubber grommets are provided at inlet / outlets to prevent ingress.
- Accepts tag type fuse links 2-25A to BS 7654.
- Facilities for Sealing by wire & lead seals provided.
- Except for the pinching screws, all screws & fasteners used in the cutout are in stainless steel.
Technical specification
Technical detail | TYPE-A1 | TYPE-B1 |
Housing material | DMC | DMC |
Rated operation current | 25 A | 25 A |
Rated operational voltage | 250V | 250V |
Rated insulation voltage | 500V | 500V |
Rated short time current | 6 KA PEAK | 6 KA PEAK |
Impulse voltage | 6 KV | 6 KV |
Cable type | TWO CORE CABLE FOR I/C & O/G | FOUR CORE CABLE FOR I/C & O/G |
Fuse link | 2-25 A TAG TYPE AS PER BS 7654 | 2-25 A TAG TYPE AS PER BS 7654 |
Sealing arrangement provided | YES | YES |